Tilt sensors are now required.

What does the Standard say? Every MEWP shall have a device to indicate whether the inclination of the chassis is within the limits permitted by the manufacturer.  This device shall be automatic, in accordance with 4.11, and shall be protected against damage and accidental change of its setting.  Maintenance adjustment of the device shall require the use of tools. The device shall also prevent elevation beyond the lowered travel position when the chassis inclination is beyond that specified by the manufacturer for that configuration.

What we changed...

All Hy-Brid Lifts will come equipped with a tilt sensor that will prevent full elevation if the inclination of the MEWP is greater than 1.5 degrees.

All Hy-Brid Lifts fit through a standard doorway without having to fold down rails