ANSI Standards A92.20, A92.22, and A92.24 were published June 1st, 2020.  As a manufacturer of Mobile Elevated Work Platforms (MEWPs) Custom Equipment, LLC has built Hy-Brid Lifts Push-Around, Pro, and Zero-Turn Series work platforms in accordance with design standard A92.20. Standards A92.22 and A92.24 outline safe use and training for owners, renters, supervisors, and users to follow.

Hy-Brid Lifts Pro Series entering doorway


Standard A92.20 specifies design calculations and stability criteria, construction, safety examinations and tests and is predominately intended for manufacturer.

A92.20 Design Changes


Standard A92.22 specifies requirements for application, inspection, training, maintenance, repair and safe operation of equipment.

A92.22 Safe Use


Standard A92.24 provides methods and guidelines to prepare MEWP training materials, defines administrative criteria and delivers elements required for proper training.

A92.24 Training


Aerial work platforms (AWP) will now be referred to as mobile elevated work platforms (MEWP).  MEWPs will be seperated into 2 groups. 

  • Group A will consist of MEWPs whose platform stays within it's tipping lines. An example of a Group A would be a low-level access Hy-Brid Lift. 
  • Group B MEWPs are anything that is not Group A such as a boom lift whose platform extends past it's tip lines. 

Mewps will further be categorized into types. 

  • Type 1 will be MEWPs for which traveling is allowed only when in the stowed position. 
  • Type 2 will be MEWPs for which traveling with the work platform in the elevated position is controlled from a point on the chassis.
  • Type 3 will be MEWPs for which traveling with the work platform in the elevated position is controlled from a point on the work platform.

Type 2 and Type 3 can be combined.




A92.20 Groups and Types

Hy-Brid Lifts Push-Around Series will be categorized as 1A.  Pro Series and Zero-Turn Series work platforms will be categorized as 3A.

Do you have questions about A92.20 and it's impact on Hy-Brid Lifts?

Please fill out the form below for answers...


Email Address: